FoxAlien · read 1 November 2026
CL-4x4
- ? Spindle not stated
- Closed-loop
Photo: FoxAlienWhat's in the box, and what you'll still need
Included, per the page
- The machine: frame, motion system and electronics
You'll still need
- Check with the maker whether a spindle is included; the page doesn't say.
- Design and toolpath (CAD/CAM) software; none is named on the page.
- Router bits, workholding (clamps) and a dust solution; no page in the record includes these in the base price.
Built from what the maker's page says is included. More in what's in the box.
Cost to start cutting
| Machine | $2,899.99 |
|---|---|
| Ready to cut | Can't say |
The page doesn't say whether a spindle is included. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
Spec table lists a 400W spindle; the page also takes 65/69 mm routers and the package list names no spindle
Controller
Controller box with 2.4" touchscreen for offline use. Four NEMA 23 closed-loop steppers, up to 3.5 Nm.
Published specs
From FoxAlien's page for this machine, read 1 November 2026. Inch-to-millimetre conversions are mine.
| Spec | As published | Source |
|---|---|---|
| Price | $2,899.99 (list $4,599.99) | product page |
| Price note | Sale price; list $4,599.99. Listed as Final Sale. | |
| Work area, as published | 122 x 122 x 10 cm (48" x 48" x 3.94") | product page |
| X travel | 1,220 mm (48.0") | product page |
| Y travel | 1,220 mm (48.0") | product page |
| Z | 100 mm (3.9") | product page |
| Spindle / router | Spec table lists a 400W spindle; the page also takes 65/69 mm routers and the package list names no spindle | product page |
| Drive | 16 mm ballscrews on X/Y, 12 mm on Z | product page |
| Linear motion | Linear rails on every axis (HG-15 per the description) | product page |
| Frame | Not published | |
| Controller and motors | Controller box with 2.4" touchscreen for offline use. Four NEMA 23 closed-loop steppers, up to 3.5 Nm. | product page |
| Software | Not published | |
| Footprint | Not published | |
| Weight | Not published | |
| Warranty | 1 year | product page |
| Assembly | Not published |
Spec notes
2 spec notes
- The page says it "can fit standard full-sized sheets without cutting them"; a 48" x 48" area can't hold a 4 x 8 ft sheet.
- The spec table lists a 400W spindle, but the package list doesn't include one.
Not published on the page: frame, software, footprint, weight, assembly.
Similar machines
- Sienci LabsAltMill MK2 4x4$3,160.00*
- MillRight CNCMega V 2 XL (35x35)$2,999.00
Photo: MillRight CNC - MillRight CNCMega V 2 XXL (50x50)$4,449.00Photo: MillRight CNC
Head-to-head
Page history
- 1 November 2026 First read from FoxAlien's page and added to the record.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.