SainSmart (Genmitsu) · checked 4 November 2026
PROVerXL 2x2
- ? Spindle not stated
- Closed-loop
The PROVerXL 2x2 is SainSmart's large pre-assembled machine, with a 679 × 679 mm (about 27 inch square) work area, ballscrews on every axis and closed-loop NEMA 23 motors. The spec table lists a 710W spindle, and SainSmart offers it with VCarve software as a bundle. It weighs 90 kg (198 lb).
Photo: SainSmartWhat's in the box, and what you'll still need
What's included
- The machine: frame, motion system and electronics
- Software named on the page: GRBL senders such as Candle and UGS; VCarve Desktop or Pro in bundles
You'll still need
- Check with the maker whether a spindle is included; the page doesn't say.
- Router bits, clamps to hold the work, and some way to deal with dust. None of the machines here include these in the base price.
Based on what the maker's page says comes in the box. More in what's in the box.
Cost to start cutting
| Machine | $2,999.00 |
|---|---|
| Ready to cut | Can't say |
The page doesn't say whether a spindle is included. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
710W AC spindle, 30,000 RPM, in the spec table. The page doesn't say plainly whether it's in the box.
Published specs
From SainSmart (Genmitsu)'s page for this machine, checked 4 November 2026. Inch figures are converted to millimetres.
| Spec | As published | Source |
|---|---|---|
| Price | $2,999.00 | product page |
| Price note | Maker's price (shown as the regular price). | |
| Work area, as published | 679 x 679 x 113 mm | product page |
| X travel | 679 mm (26.7") | product page |
| Y travel | 679 mm (26.7") | product page |
| Z | 113 mm (4.4") | product page |
| Spindle / router | 710W AC spindle, 30,000 RPM, in the spec table. The page doesn't say plainly whether it's in the box. | product page |
| Drive | Ball screws: X 20 mm, Y 20 mm, Z 12 mm (spec table) | product page |
| Linear motion | HG20 linear guides on Y, HG15 on X and Z | product page |
| Frame | Not published | |
| Controller and motors | 32-bit board, GRBL 1.1h. Closed-loop NEMA 23 steppers. | product page |
| Software | GRBL senders such as Candle and UGS; VCarve Desktop or Pro in bundles | product page |
| Footprint | 1161 x 1142 x 617 mm | product page |
| Weight | 90 kg (198.4 lb) | product page |
| Warranty | One year | product page |
| Assembly | Pre-assembled | product page |
Spec conflicts
1 spec conflict
- Z ball screw: the spec table says 12 mm, but the description says the machine is "Built with Φ20mm ball screws."
Not published on the page: frame.
Similar machines
- Carbide 3DShapeoko 5.1 Pro 4x2$3,550.00
Photo: Carbide 3D - MillRight CNCMega V 2 (19x19)$2,599.00
Photo: MillRight CNC - MillRight CNCMega V 2 XL (35x35)$2,999.00Photo: MillRight CNC
Head-to-head
- SainSmart PROVerXL 2x2 vs MillRight CNC Mega V 2 XL (35x35)
- SainSmart PROVerXL 2x2 vs Onefinity Gen 2 Elite Woodworker
- SainSmart PROVerXL 2x2 vs Sienci Labs AltMill MK2 2x4
Page history
- 4 November 2026 Added to the site from SainSmart's page.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.