Inventables · read 1 November 2026
X-Carve Pro 4x2
- ? Spindle not stated
Photo: InventablesWhat's in the box, and what you'll still need
Included, per the page
- The machine: frame, motion system and electronics
- Software named on the page: Easel Pro trial
You'll still need
- Check with the maker whether a spindle is included; the page doesn't say.
- Router bits, workholding (clamps) and a dust solution; no page in the record includes these in the base price.
Built from what the maker's page says is included. More in what's in the box.
Cost to start cutting
| Machine | $4,995.00 |
|---|---|
| Ready to cut | Can't say |
The page doesn't say whether a spindle is included. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
1.5 kW spindle, 8,000-24,000 RPM, ER16 (not listed as an included item)
Published specs
From Inventables's page for this machine, read 1 November 2026. Some figures come from the maker's spec page. Inch-to-millimetre conversions are mine.
| Spec | As published | Source |
|---|---|---|
| Price | $4,995.00 (list $5,995.00) | spec page |
| Price note | Sale price; list $5,995.00. | |
| Work area, as published | 48" x 24" x 4". Millimetres converted by me. | spec page |
| X travel | 1,219 mm (48.0") | spec page |
| Y travel | 610 mm (24.0") | spec page |
| Z | 102 mm (4.0") | spec page |
| Spindle / router | 1.5 kW spindle, 8,000-24,000 RPM, ER16 (not listed as an included item) | spec page |
| Drive | 1" ball screws | spec page |
| Linear motion | Linear guides | spec page |
| Frame | Not published | |
| Controller and motors | Not published | |
| Software | Easel Pro trial | spec page |
| Footprint | 65.75" x 31.6" | spec page |
| Weight | 275 lb | spec page |
| Warranty | 1 year | spec page |
| Assembly | Not published |
Spec notes
None found on this reading.
Not published on the page: frame, controller and motors, assembly.
Similar machines
- Next Wave CNCShark HD520$4,250.00
Photo: Next Wave CNC - Sienci LabsAltMill MK2 2x4$3,890.00*
- MillRight CNCMega V 2 XL (35x35)$2,999.00
Photo: MillRight CNC
Head-to-head
- Inventables X-Carve Pro 4x2 vs Carbide 3D Shapeoko HDM V3
- Inventables X-Carve Pro 4x2 vs Next Wave CNC Shark HD520
- Inventables X-Carve Pro 4x2 vs Sienci Labs AltMill MK2 2x4
Page history
- 1 November 2026 First read from Inventables's page and added to the record.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.