CNC record › Onefinity
Onefinity · read 1 November 2026
Apprentice
- Ballscrew
- Bring your own router
$995.00
- Work area
- 419 × 419 mm
- Z
- 133 mm (5.2")
- Drive
- Ballscrew
- Spindle
- Not included
- Warranty
- Not published
Work area to scale
Features
Controller
Redline CNC controller. Open-loop 1.2 Nm NEMA 23 motors. Computer required.
Size
16.5 x 16.5" (419 x 419 mm); Z cutting area 5.25" (133 mm), Z travel 4.5" (114 mm). The page doesn't explain why the Z cutting figure is larger than the Z travel.
Published specs
From Onefinity's page for this machine, read 1 November 2026. Inch-to-millimetre conversions are mine.
| Price | $995.00 |
|---|---|
| Price note | "Starting at" price on the maker's compare page. |
| Work area, as published | 16.5 x 16.5" (419 x 419 mm); Z cutting area 5.25" (133 mm), Z travel 4.5" (114 mm). The page doesn't explain why the Z cutting figure is larger than the Z travel. |
| X travel | 419 mm (16.5") |
| Y travel | 419 mm (16.5") |
| Z | 133 mm (5.2") |
| Spindle / router | Not included; takes a 65 mm spindle or a Makita trim router |
| Drive | Ballscrew (1610 on X/Y, 1204 on Z) |
| Linear motion | 30 mm hardened steel tubes X/Y; 16 mm guide rails Z |
| Frame | Not published |
| Controller and motors | Redline CNC controller. Open-loop 1.2 Nm NEMA 23 motors. Computer required. |
| Software | Lists Vectric, Carveco, Fusion 360, Easel, Carbide Create compatibility; no subscription |
| Footprint | Not published |
| Weight | Not published |
| Warranty | Not published |
| Assembly | Not published |
Where the page contradicts itself
None found on this reading.
Not published
The page doesn't give: frame, footprint, weight, warranty, assembly. I'll add missing figures with their source if I find them on another page from the same maker. Owners discuss this maker's machines on the Onefinity CNC Forum.
Similar in size
Photo: SainSmartSainSmart (Genmitsu)
4040-PRO
$599.00
Photo: SainSmartSainSmart (Genmitsu)
4040-PRO MAX
$949.00
Photo: FoxAlienFoxAlien
Masuter Pro
$599.99