Onefinity · read 1 November 2026
Gen 2 Elite Woodworker
- ✗ Router not included
- Closed-loop
What's in the box, and what you'll still need
Included, per the page
- The machine: frame, motion system and electronics
- Software named on the page: Lists Vectric, Carveco, Fusion 360, Easel, Carbide Create compatibility; no subscription
You'll still need
- A router or spindle. Not included; takes an 80 mm or 65 mm spindle or a Makita trim router
- Router bits, workholding (clamps) and a dust solution; no page in the record includes these in the base price.
Built from what the maker's page says is included. More in what's in the box.
Cost to start cutting
| Machine | $2,195.00 |
|---|---|
| Makita RT0701C 1.25 HP compact router | $165.00 |
| Ready to cut, before bits and clamps | $2,360.00* |
Onefinity's page lists a Makita trim router as a fit. Price from Sienci Labs, which sells the same model. * One or more of these prices is shown without a currency. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
Not included; takes an 80 mm or 65 mm spindle or a Makita trim router
Controller
Redline CNC controller. Closed-loop 2 Nm X/Y, 1.2 Nm Z. Computer optional (15" screen option); WiFi, Ethernet.
Published specs
From Onefinity's page for this machine, read 1 November 2026. Some figures come from the maker's spec page. Inch-to-millimetre conversions are mine.
| Spec | As published | Source |
|---|---|---|
| Price | $2,195.00 (list $2,437.00) | spec page |
| Price note | Sale price for the Gen 2 Elite series ($2,437.00 before the sale). The product page doesn't give a separate price for each of the three sizes. Includes the RealTime CNC RTS-2 closed-loop controller; spindle sold separately. | |
| Work area, as published | 33 x 33" (838 x 838 mm); Z cutting area 7" (178 mm), Z travel 6.4" (163 mm) | spec page |
| X travel | 838 mm (33.0") | spec page |
| Y travel | 838 mm (33.0") | spec page |
| Z | 178 mm (7.0") | spec page |
| Spindle / router | Not included; takes an 80 mm or 65 mm spindle or a Makita trim router | spec page |
| Drive | Ballscrew (1616 on X/Y, 1610 on Z) | spec page |
| Linear motion | 60 mm steel tube X, 50 mm Y; 20 mm guide rails Z | spec page |
| Frame | Not published | |
| Controller and motors | Redline CNC controller. Closed-loop 2 Nm X/Y, 1.2 Nm Z. Computer optional (15" screen option); WiFi, Ethernet. | spec page |
| Software | Lists Vectric, Carveco, Fusion 360, Easel, Carbide Create compatibility; no subscription | spec page |
| Footprint | Not published | |
| Weight | Not published | |
| Warranty | Not published | |
| Assembly | Not published |
Spec notes
None found on this reading.
Not published on the page: frame, footprint, weight, warranty, assembly. Owners talk about these machines on the Onefinity CNC Forum.
Similar machines
- Sienci LabsLongMill MK3 30x30$1,400.00*
- MillRight CNCMega V 2 XL (35x35)$2,999.00
Photo: MillRight CNC - SainSmartPROVerXL 6050 Plus$1,799.00
Photo: SainSmart
Head-to-head
- Onefinity Gen 2 Elite Woodworker vs MillRight CNC Mega V 2 XL (35x35)
- Onefinity Gen 2 Elite Woodworker vs Sienci Labs LongMill MK3 30x30
Page history
- 1 November 2026 First read from Onefinity's page and added to the record.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.