Carbide 3D · read 1 November 2026
Shapeoko HDM V3
- ✓ Spindle included
Photo: Carbide 3DWhat's in the box, and what you'll still need
Included, per the page
- The machine: frame, motion system and electronics
- Router or spindle: 80 mm water-cooled spindle with VFD, 1.5/2.2 kW, 8,000-24,000 RPM, ER-20
- Software named on the page: Carbide Motion, Carbide Create
You'll still need
- Router bits, workholding (clamps) and a dust solution; no page in the record includes these in the base price.
Built from what the maker's page says is included. More in what's in the box.
Cost to start cutting
| Machine | $5,700.00 |
|---|---|
| Ready to cut, before bits and clamps | $5,700.00 |
Router or spindle included, per the page. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
80 mm water-cooled spindle with VFD, 1.5/2.2 kW, 8,000-24,000 RPM, ER-20 (included)
Published specs
From Carbide 3D's page for this machine, read 1 November 2026. Inch-to-millimetre conversions are mine.
| Spec | As published | Source |
|---|---|---|
| Price | $5,700.00 | product page |
| Price note | Maker's price. | |
| Work area, as published | Travel X 690 x Y 610 x Z 145 mm | product page |
| X travel | 690 mm (27.2") | product page |
| Y travel | 610 mm (24.0") | product page |
| Z | 145 mm (5.7") | product page |
| Spindle / router | 80 mm water-cooled spindle with VFD, 1.5/2.2 kW, 8,000-24,000 RPM, ER-20 (included) | product page |
| Drive | 16 mm ball screws | product page |
| Linear motion | HG-15 linear rails | product page |
| Frame | Not published | |
| Controller and motors | Not published | |
| Software | Carbide Motion, Carbide Create | product page |
| Footprint | 1063 x 961 mm | product page |
| Weight | 120 kg | product page |
| Warranty | 12 months | product page |
| Assembly | Not published |
Spec notes
1 spec note
- The meta description, the overview and the comparison table list different materials.
Not published on the page: frame, controller and motors, assembly. Owners talk about these machines on the Carbide 3D Community Site.
Similar machines
- Carbide 3DShapeoko 5.1 Pro 4x2$3,550.00
Photo: Carbide 3D - InventablesX-Carve Pro 4x2$4,995.00
Photo: Inventables - MakeraCarvera$4,799.00
Photo: Makera
Head-to-head
- Carbide 3D Shapeoko HDM V3 vs Inventables X-Carve Pro 4x2
- Carbide 3D Shapeoko HDM V3 vs Next Wave CNC Shark HD520
Page history
- 1 November 2026 First read from Carbide 3D's page and added to the record.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.