SainSmart (Genmitsu) · read 1 November 2026
3018-PROVer V2
- ✓ Spindle included
Photo: SainSmartWhat's in the box, and what you'll still need
Included, per the page
- The machine: frame, motion system and electronics
- Router or spindle: 775 spindle, 42 mm diameter
- Software named on the page: Lists Easel, Fusion 360, Carveco Maker (CAD/CAM); UGS, Candle, Easel (control)
You'll still need
- Router bits, workholding (clamps) and a dust solution; no page in the record includes these in the base price.
Built from what the maker's page says is included. More in what's in the box.
Cost to start cutting
| Machine | $219.00 |
|---|---|
| Ready to cut, before bits and clamps | $219.00 |
Router or spindle included, per the page. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
775 spindle, 42 mm diameter (included). Power and max RPM not published on this page.
Published specs
From SainSmart (Genmitsu)'s page for this machine, read 1 November 2026. Inch-to-millimetre conversions are mine.
| Spec | As published | Source |
|---|---|---|
| Price | $219.00 (list $269.00) | product page |
| Price note | Sale price; list $269.00. Machine only; an offline controller is a paid option. | |
| Work area, as published | 11.4" x 7.1" x 1.6" (290 x 180 x 40 mm) | product page |
| X travel | 290 mm (11.4") | product page |
| Y travel | 180 mm (7.1") | product page |
| Z | 40 mm (1.6") | product page |
| Spindle / router | 775 spindle, 42 mm diameter (included). Power and max RPM not published on this page. | product page |
| Drive | Leadscrew | product page |
| Linear motion | Linear shaft | product page |
| Frame | Aluminium; X-Z assembly is plastic | product page |
| Controller and motors | 32-bit board, GRBL (version not published). Power supply 24V/4A. | product page |
| Software | Lists Easel, Fusion 360, Carveco Maker (CAD/CAM); UGS, Candle, Easel (control) | product page |
| Footprint | Not published | |
| Weight | Not published | |
| Warranty | Not published | |
| Assembly | Semi-assembled, 20-35 minutes | product page |
Spec notes
3 spec notes
- The spec table lists the offline controller as "Optional" and the purchase options sell it separately, but the FAQ says the machine "comes with an offline controller".
- The intro says assembly takes "less than 35 minutes"; the spec table says 20-35 minutes.
- The discount badge says -18%; the savings line says "Save 19%".
Not published on the page: footprint, weight, warranty.
Similar machines
- SainSmart3020-PRO MAX V2$399.00
Photo: SainSmart - SainSmart3020-PRO Ultra$599.00
Photo: SainSmart - SainSmart4040-PRO$599.00
Photo: SainSmart
Head-to-head
Page history
- 1 November 2026 First read from SainSmart's page and added to the record.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.