SainSmart (Genmitsu) · read 1 November 2026
3020-PRO MAX V2
- ? Spindle not stated
Photo: SainSmartWhat's in the box, and what you'll still need
Included, per the page
- The machine: frame, motion system and electronics
You'll still need
- Check with the maker whether a spindle is included; the page doesn't say.
- Design and toolpath (CAD/CAM) software; none is named on the page.
- Router bits, workholding (clamps) and a dust solution; no page in the record includes these in the base price.
Built from what the maker's page says is included. More in what's in the box.
Cost to start cutting
| Machine | $399.00 |
|---|---|
| Ready to cut | Can't say |
The page doesn't say whether a spindle is included. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Size
300 x 205 x 78 mm (11.81" x 8.07" x 3.07"). Axes not labelled; X, Y, Z order assumed.
Published specs
From SainSmart (Genmitsu)'s page for this machine, read 1 November 2026. Inch-to-millimetre conversions are mine.
| Spec | As published | Source |
|---|---|---|
| Price | $399.00 (list $499.00) | product page |
| Price note | Sale price; list $499.00. | |
| Work area, as published | 300 x 205 x 78 mm (11.81" x 8.07" x 3.07"). Axes not labelled; X, Y, Z order assumed. | product page |
| X travel | 300 mm (11.8") | product page |
| Y travel | 205 mm (8.1") | product page |
| Z | 78 mm (3.1") | product page |
| Spindle / router | Not published on this page | product page |
| Drive | Not published | |
| Linear motion | Dual steel X-axis guide rail; Y and Z not published | product page |
| Frame | 4040 aluminium profile on Y; one-piece machined aluminium spoilboard | product page |
| Controller and motors | Grbl V1.1 with 32-bit TB67S109 drivers; upgraded offline controller | product page |
| Software | Not published | |
| Footprint | Not published | |
| Weight | Not published | |
| Warranty | Not published | |
| Assembly | Control board, e-stop, limit switches and drag chain pre-assembled | product page |
Spec notes
2 spec notes
- The spec table names the driver chip "TB67S109"; the text says "Toshiba TB6S109".
- The spec table lists six limit switches (X+, X-, Y+, Y-, Z+, Z-); the "What's in the box" list has "1x Limit Switch (X&Y-axis)".
Not published on the page: drive, software, footprint, weight, warranty.
Similar machines
- SainSmart3020-PRO Ultra$599.00
Photo: SainSmart - SainSmart3018-PROVer V2$219.00
Photo: SainSmart - SainSmart4040-PRO$599.00
Photo: SainSmart
Head-to-head
- SainSmart 3020-PRO MAX V2 vs SainSmart 3018-PROVer V2
- SainSmart 3020-PRO MAX V2 vs SainSmart 3020-PRO Ultra
Page history
- 1 November 2026 First read from SainSmart's page and added to the record.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.