Inventables · read 1 November 2026
X-Carve Pro 4x4
- ? Spindle not stated
Photo: InventablesWhat's in the box, and what you'll still need
Included, per the page
- The machine: frame, motion system and electronics
- Software named on the page: Easel Pro trial
You'll still need
- Check with the maker whether a spindle is included; the page doesn't say.
- Router bits, workholding (clamps) and a dust solution; no page in the record includes these in the base price.
Built from what the maker's page says is included. More in what's in the box.
Cost to start cutting
| Machine | $7,495.00 |
|---|---|
| Ready to cut | Can't say |
The page doesn't say whether a spindle is included. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
1.5 kW spindle, 8,000-24,000 RPM, ER16 (not listed as an included item)
Published specs
From Inventables's page for this machine, read 1 November 2026. Some figures come from the maker's spec page. Inch-to-millimetre conversions are mine.
| Spec | As published | Source |
|---|---|---|
| Price | $7,495.00 | spec page |
| Price note | Maker's price (see spec notes). | |
| Work area, as published | 48" x 48" x 4". Millimetres converted by me. | spec page |
| X travel | 1,219 mm (48.0") | spec page |
| Y travel | 1,219 mm (48.0") | spec page |
| Z | 102 mm (4.0") | spec page |
| Spindle / router | 1.5 kW spindle, 8,000-24,000 RPM, ER16 (not listed as an included item) | spec page |
| Drive | 1" ball screws | spec page |
| Linear motion | Linear guides | spec page |
| Frame | Not published | |
| Controller and motors | Not published | |
| Software | Easel Pro trial | spec page |
| Footprint | 65.75" x 55.75" | spec page |
| Weight | 300 lb | spec page |
| Warranty | 1 year | spec page |
| Assembly | Not published |
Spec notes
1 spec note
- The regular price is $6,995 in one block and $7,495 in another.
Not published on the page: frame, controller and motors, assembly.
Similar machines
- MillRight CNCMega V 2 XXL (50x50)$4,449.00
Photo: MillRight CNC - FoxAlienCL-4x4$2,899.99
Photo: FoxAlien - Sienci LabsAltMill MK2 4x4$3,160.00*
Head-to-head
Page history
- 1 November 2026 First read from Inventables's page and added to the record.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.