FoxAlien Masuter Pro Max 2x2 vs Onefinity Apprentice
Two desktop CNC routers side by side, from each maker's own page, read 1 November 2026. Neither has been tested for this site, so this shows what each maker publishes, not which cuts better.
Photo: FoxAlienFoxAlien Masuter Pro Max 2x2
$899.99
Where they differ
- FoxAlien Masuter Pro Max 2x2 is listed $95 lower ($899.99 against $995.00).
- FoxAlien Masuter Pro Max 2x2 has the larger published X × Y work area: 600 × 600 mm against 419 × 419 mm (2.1× the area).
- FoxAlien Masuter Pro Max 2x2 includes a router or spindle; Onefinity Apprentice doesn't include one.
- Drive: FoxAlien Masuter Pro Max 2x2 has a drive the page doesn't fully describe; Onefinity Apprentice has ballscrew drive.
- FoxAlien Masuter Pro Max 2x2 lists motors the page doesn't describe as open or closed loop; Onefinity Apprentice lists open-loop motors.
- Ready to cut (machine plus the cheapest sourced router or spindle, before bits): $900 against $1,160.
Published specs
| FoxAlien Masuter Pro Max 2x2 | Onefinity Apprentice | |
|---|---|---|
| Price | $899.99 | $995.00 |
| Work area | 600 × 600 mm | 419 × 419 mm |
| Z | Not published | 133 mm (5.2") |
| Spindle or router | 500W brushless (included). RPM not published on this page. | Not included; takes a 65 mm spindle or a Makita trim router |
| Drive | Not published | Ballscrew (1610 on X/Y, 1204 on Z) |
| Linear guides | Not published | 30 mm hardened steel tubes X/Y; 16 mm guide rails Z |
| Controller and motors | Control box included; firmware not published. NEMA 17 steppers. | Redline CNC controller. Open-loop 1.2 Nm NEMA 23 motors. Computer required. |
| Software | Lists Candle, Carveco, Easel and GRBL senders | Lists Vectric, Carveco, Fusion 360, Easel, Carbide Create compatibility; no subscription |
| Footprint | Not published | Not published |
| Weight | Not published | Not published |
| Warranty | 1 year on the machine | Not published |
| Spec notes | None found | None found |
| Source | Maker’s page ↗ | Maker’s page ↗ |
Work areas to scale
Open in the compare tool See them on your bench
Why this pair
Pairs are picked by a rule: machines in the same size class and within about 60% of each other's price, plus each machine's nearest sibling from the same maker. No search or keyword data was used. All 46 pairs.
Related comparisons
- FoxAlien Masuter Pro Max 2x2 vs FoxAlien Masuter 3S
- FoxAlien Masuter Pro Max 2x2 vs FoxAlien Masuter Pro
- FoxAlien Masuter Pro Max 2x2 vs SainSmart 4040-PRO MAX
- Onefinity Apprentice vs SainSmart 4040-PRO MAX
- Onefinity Apprentice vs SainSmart PROVerXL 4030S
- Onefinity Apprentice vs MillRight CNC Carve King 2