MillRight CNC Carve King 2 vs Onefinity Apprentice
Two desktop CNC routers side by side, from each maker's own page, read 1 November 2026. Neither has been tested for this site, so this shows what each maker publishes, not which cuts better.
Photo: MillRight CNCMillRight CNC Carve King 2
$999.00
Where they differ
- Onefinity Apprentice is listed $4 lower ($995.00 against $999.00).
- MillRight CNC Carve King 2 has the larger published X × Y work area: 438 × 438 mm against 419 × 419 mm (1.1× the area).
- Onefinity Apprentice lists more Z: 133 mm against 102 mm.
- Drive: MillRight CNC Carve King 2 has leadscrew drive; Onefinity Apprentice has ballscrew drive.
- MillRight CNC Carve King 2 lists motors the page doesn't describe as open or closed loop; Onefinity Apprentice lists open-loop motors.
- Only MillRight CNC Carve King 2 publishes a footprint.
- Ready to cut (machine plus the cheapest sourced router or spindle, before bits): $1,164 against $1,160.
Published specs
| MillRight CNC Carve King 2 | Onefinity Apprentice | |
|---|---|---|
| Price | $999.00 | $995.00 |
| Work area | 438 × 438 mm | 419 × 419 mm |
| Z | 102 mm (4.0") | 133 mm (5.2") |
| Spindle or router | Not included; Makita RT0701C mount only | Not included; takes a 65 mm spindle or a Makita trim router |
| Drive | Trapezoidal stainless leadscrews with anti-backlash nuts, all axes | Ballscrew (1610 on X/Y, 1204 on Z) |
| Linear guides | V-channel rails with V wheels | 30 mm hardened steel tubes X/Y; 16 mm guide rails Z |
| Controller and motors | MillRight boards on an Uno running GRBL. NEMA 17 steppers, dual Y. | Redline CNC controller. Open-loop 1.2 Nm NEMA 23 motors. Computer required. |
| Software | None included; points to Fusion 360 and MillRight's UGS | Lists Vectric, Carveco, Fusion 360, Easel, Carbide Create compatibility; no subscription |
| Footprint | 25" x 30" on the table; 28" x 30" x 17" with motor overhangs | Not published |
| Weight | Not published | Not published |
| Warranty | 180-day parts warranty | Not published |
| Spec notes | None found | None found |
| Source | Maker’s page ↗ | Maker’s page ↗ |
Work areas to scale
Open in the compare tool See them on your bench
Why this pair
Pairs are picked by a rule: machines in the same size class and within about 60% of each other's price, plus each machine's nearest sibling from the same maker. No search or keyword data was used. All 46 pairs.
Related comparisons
- MillRight CNC Carve King 2 vs FoxAlien Masuter 3S
- MillRight CNC Carve King 2 vs SainSmart PROVerXL 4030S
- MillRight CNC Carve King 2 vs MillRight CNC Mega V 2 (19x19)
- Onefinity Apprentice vs FoxAlien Masuter Pro Max 2x2
- Onefinity Apprentice vs SainSmart 4040-PRO MAX
- Onefinity Apprentice vs SainSmart PROVerXL 4030S