MillRight CNC · checked 4 November 2026
Mega V 2 Full Sheet
- ✗ Router not included
- Closed-loop
The Mega V 2 Full Sheet is MillRight CNC's 4 × 8 foot version of the Mega V 2, with a 97 × 50 inch work area for cutting whole 4 × 8 sheets. It uses the same steel rack and pinion on X and Y, screw drive on Z and closed-loop motors as the smaller sizes, and it comes without a router or spindle. MillRight aims it at cabinetmakers, sign shops and hobbyists who work with sheet goods.
Photo: MillRight CNCWhat's in the box, and what you'll still need
What's included
- The machine: frame, motion system and electronics
- Software named on the page: CAD/CAM not included
You'll still need
- A router or spindle. Not included; DeWalt router mount (+$50) or 1.5 kW / 2.2 kW spindle options
- Router bits, clamps to hold the work, and some way to deal with dust. None of the machines here include these in the base price.
Based on what the maker's page says comes in the box. More in what's in the box.
Cost to start cutting
| Machine | $7,199.00 |
|---|---|
| Ready to cut | Can't say |
No router or spindle price found for this machine yet. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Spindle or router
Not included; DeWalt router mount (+$50) or 1.5 kW / 2.2 kW spindle options
Published specs
From MillRight CNC's page for this machine, checked 4 November 2026. Inch figures are converted to millimetres.
| Spec | As published | Source |
|---|---|---|
| Price | $7,199.00 | product page |
| Price note | Base price, with GRBL, no spindle or router. | |
| Work area, as published | X 97", Y 50", Z 5.25" (with 6.25" Z stroke). Converted to millimetres. | product page |
| X travel | 2,464 mm (97.0") | product page |
| Y travel | 1,270 mm (50.0") | product page |
| Z | 133 mm (5.2") | product page |
| Spindle / router | Not included; DeWalt router mount (+$50) or 1.5 kW / 2.2 kW spindle options | product page |
| Drive | Steel rack and pinion on X and Y; screw drive on Z | product page |
| Linear motion | Linear profile rails on every axis | product page |
| Frame | Not published | |
| Controller and motors | GRBL by default (Masso G3 Touch +$2,200). Closed-loop motors. | product page |
| Software | CAD/CAM not included | product page |
| Footprint | 63" x 105" | product page |
| Weight | Not published | |
| Warranty | Not published | |
| Assembly | Assembly required | product page |
Spec conflicts
1 spec conflict
- The feature list says "6 inches of Z stroke"; the cutting-area line says 6.25".
Not published on the page: frame, weight, warranty.
Similar machines
- Sienci LabsAltMill 4x8$10,390.00*
- InventablesX-Carve Pro 4x4$7,495.00
Photo: Inventables - MillRight CNCMega V 2 XXL (50x50)$4,449.00
Photo: MillRight CNC
Head-to-head
- MillRight CNC Mega V 2 Full Sheet vs Inventables X-Carve Pro 4x4
- MillRight CNC Mega V 2 Full Sheet vs MillRight CNC Mega V 2 XXL (50x50)
- MillRight CNC Mega V 2 Full Sheet vs Sienci Labs AltMill 4x8
Page history
- 4 November 2026 Added to the site from MillRight CNC's page.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.