SainSmart 3018-PRO DIY Kit vs Two Trees TTC3018 Pro
Two desktop CNC routers side by side, using each maker's own specs, checked 4 November 2026. We haven't tested either one, so this compares what the makers publish, not how well they cut.
Photo: SainSmartSainSmart 3018-PRO DIY Kit
$159.00
Photo: Two TreesTwo Trees TTC3018 Pro
$199.00
Where they differ
- SainSmart 3018-PRO DIY Kit is listed $40 lower ($159.00 against $199.00).
- SainSmart 3018-PRO DIY Kit lists more Z: 45 mm against 40 mm.
- Only Two Trees TTC3018 Pro publishes a footprint.
Published specs
| SainSmart 3018-PRO DIY Kit | Two Trees TTC3018 Pro | |
|---|---|---|
| Price | $159.00 | $199.00 |
| Work area | 300 × 180 mm | 300 × 180 mm |
| Z | 45 mm (1.8") | 40 mm (1.6") |
| Spindle or router | Not stated. The page says a 20,000 rpm spindle can be dropped in, but doesn't say clearly what comes in the box. | Not published on this page |
| Drive | Linear shafts and leadscrews | T8 4mm screw (as listed) |
| Linear guides | Linear shafts | Not published |
| Controller and motors | 8-bit board, GRBL (Arduino-based) | Not published |
| Software | Carveco Maker included; the page also names LaserGRBL, LightBurn, Easel and Fusion 360 | Not published |
| Footprint | Not published | 420 × 355 × 280 mm |
| Weight | Not published | 6.8 kg net (7.4 kg gross) |
| Warranty | Not published | One year |
| Spec conflicts | None found | 1 |
| Source | Maker’s page ↗ | Maker’s page ↗ |
Work areas to scale
Open in the compare tool See them on your bench
Why this pair
Pairs are picked by a rule: machines in the same size class and within about 60% of each other's price, plus each machine's nearest sibling from the same maker. No search or keyword data was used. All 61 pairs.