Two Trees · checked 4 November 2026
TTC3018 Pro
- ? Spindle not stated
The TTC3018 Pro is Two Trees' small starter machine, with a 300 × 180 mm work area in a frame that weighs under 7 kg. Two Trees aims it at beginners and lists wood, plastic, thin aluminum, brass and acrylic. Its page says little about the spindle or controller, so most of what's here comes from the spec table.
Photo: Two TreesWhat's in the box, and what you'll still need
What's included
- The machine: frame, motion system and electronics
You'll still need
- Check with the maker whether a spindle is included; the page doesn't say.
- Design and toolpath (CAD/CAM) software; none is named on the page.
- Router bits, clamps to hold the work, and some way to deal with dust. None of the machines here include these in the base price.
Based on what the maker's page says comes in the box. More in what's in the box.
Cost to start cutting
| Machine | $199.00 |
|---|---|
| Ready to cut | Can't say |
The page doesn't say whether a spindle is included. Bits, workholding, dust collection, software and a table aren't counted; add your own in the cost estimate. Accessory prices read 1 November 2026.
Work area to scale
Features
Published specs
From Two Trees' page for this machine, checked 4 November 2026. Inch figures are converted to millimetres.
| Spec | As published | Source |
|---|---|---|
| Price | $199.00 (list $329.00) | product page |
| Price note | Sale price; list $329.00. | |
| Work area, as published | 300 × 180 × 40 mm | product page |
| X travel | 300 mm (11.8") | product page |
| Y travel | 180 mm (7.1") | product page |
| Z | 40 mm (1.6") | product page |
| Spindle / router | Not published on this page | product page |
| Drive | T8 4mm screw (as listed) | product page |
| Linear motion | Not published | |
| Frame | Not published | |
| Controller and motors | Not published | |
| Software | Not published | |
| Footprint | 420 × 355 × 280 mm | product page |
| Weight | 6.8 kg net (7.4 kg gross) | product page |
| Warranty | One year | product page |
| Assembly | Not published |
Spec conflicts
1 spec conflict
- Engraving accuracy is "100±0.05mm" in the comparison table and 0.1 mm in the technical data.
Not published on the page: linear motion, frame, controller and motors, software, assembly.
Similar machines
- SainSmart3018-PROVer V2$219.00
Photo: SainSmart - SainSmart3018-PRO DIY Kit$159.00
Photo: SainSmart - SainSmart3020-PRO MAX V2$399.00
Photo: SainSmart
Head-to-head
- Two Trees TTC3018 Pro vs SainSmart 3018-PRO DIY Kit
- Two Trees TTC3018 Pro vs SainSmart 3018-PROVer V2
Page history
- 4 November 2026 Added to the site from Two Trees' page.
No price or spec changes recorded since then. When a figure changes, the old one is kept here with the date it was noticed.